• f5e4157711

Environmental Ryokai LED Underwater Light Function and Control

Product Type: Introduction to the function and manufacturing process of the environmental lighting Led underwater light

Technical field: A kind of LED underwater light, supports standard USITT DMX512/1990, 16-bit gray scale, gray level up to 65536, making the light color more delicate and soft.
Background technique: LED underwater light is a kind of lamps installed under the water. The lamp is made of 316 stainless steel + tempered glass, which makes the appearance small and exquisite, beautiful and high-grade. It uses LED as the light source + DMX512 signal control, and is controlled by red, green and blue. , White is composed of underwater lighting fixtures with mixed color changes; it is an aesthetic choice for environmental lighting such as fountains, theme parks, exhibitions, commercial and artistic lighting.
Product content: The purpose of this product is to provide LED underwater lights with a waterproof effect of IP68, low energy consumption, ultra-brightness, direct radiation and scattering. Low temperature cold light, low fever, healthy and environmentally friendly, no violet and infrared radiation. In order to achieve the above objectives, this product provides the following technical solutions: LED underwater lights, including a lamp housing, a lamp cover, a base, and glass. The base is provided with a support, and the lamp housing is hinged on the support and can be The hinge point rotates, an LED lamp is arranged in the lamp housing, and the lamp is connected to the main line of the lamp leading to the control system at the bottom of the lamp housing. A 5-10mm thick tempered glass panel is used directly above the LED lamp. The lamp housing is made of marine grade 316 stainless steel. The connection between the support body and the base is fastened with marine grade 316 stainless steel screws, and the connection between the periphery of the lamp cover and the lamp housing is also fastened with 316 stainless steel screws. A silicone seal is arranged between the lamp housing and the lamp cover, and the bottom of the lamp housing and the main line of the lamp are also sealed; the surface of the lamp housing adopts a wire drawing and polishing process. The LED lights include red/yellow/green/blue/white/seven-color luminous colors. The voltage used by the LED lamp includes DC12V, DC24V; three-level insulation of electrical appliances, and safe DC low-voltage power supply. Compared with the existing technology, this product has the following performance: the waterproof effect reaches IP68, and the lamp can always work below 10 meters from the water surface (the test condition is 30 meters). The best projection angle is 10-40°. The controller is connected to the DMX console to control the synchronization effect. Each unit has a separate address. The red, green, and blue lights are composed of corresponding 3 DMX channels, and up to 170 pixels and red, green, blue, and white lights can be connected. Composed of corresponding 4 DMX channels, up to 128 pixels can be connected. Configure DMX controller to realize color change, dynamic effect and animation mode. Choose super bright CREE LED as the light source, the theoretical bulb can emit 100,000 hours, and the theoretical life of the lamp is more than 50,000 hours. Each underwater lamp is composed of multiple light sources (red light, blue light, green light, white light or a combination of 4 colors in 1LED).

Product requirment:

1. An LED underwater lamp, characterized in that it comprises a lamp housing, a lamp cover, and a base. The base is provided with a support body. The lamp housing is hinged on the support body and can rotate along the hinge point. An LED lamp is provided, and the lamp is connected to a lamp wire leading to the control system at the bottom of the lamp housing.
2. The LED underwater light is characterized in that a 5-10mm thick tempered glass panel is used directly above the LED light.

3. The LED underwater lamp is characterized in that the lamp housing is made of 316 stainless steel.

4. The LED underwater lamp is characterized in that the connection between the support body and the base is fastened with 316 stainless steel screws, and the connection between the periphery of the lamp cover and the lamp housing is also fastened with 316 stainless steel screws.

5. The LED underwater lamp is characterized in that a silicone seal is provided between the lamp housing and the glass, and the bottom of the lamp housing and the lamp wire are also sealed.
6. The LED underwater lamp is characterized in that the surface of the lamp housing is processed by drawing and polishing. 7. The LED underwater light is characterized in that the LED light includes red/yellow/green/blue/white/seven-color luminous colors. 8. The LED underwater light is characterized in that the voltage used by the LED light includes DC12V and DC24V.


Post time: Jan-27-2021